Hp Laserjet P1102w Wireless Setup Mac: Guidelines To Follow

October 8, 2020

I am trying to complete the HP Laserjet p1102w Wireless Setup Mac, but unable to do so. What should I Do? Well! Setting up your printer for a Mac device is not a difficult process. All you need is to follow the guidelines step by step carefully to make sure that you complete the setup without any trouble. In this post, we are sharing the easy instructions that can help you with the HP Laserjet p1102w Wireless Setup for your Mac device.

So, read on and follow the simple steps to complete the process.

Step by step Instructions to Complete HP LaserJet P1102w Wireless Setup Mac

Gather the details like “Network Name” and ‘Passphrase”.

Now, you need to connect the USB cable to your USB port on the printer rear and to your system.
Check and make sure that your router firmware is updated.
Go to the ‘Software and Driver Downloads, enter the name of your printer and hit the ‘Enter’ button.
Click on the ‘Apple’ menu and choose the ‘System Preferences’.
Based upon the operating system version, click on the ‘Print and Fax, Print and Scan, or Printers and Scanners option.
Click on your ‘Printer Name’ and choose the ‘Option and Supplies’.
Click on the ‘Utility’ and then choose ‘Open Printer Utility’.
Click on ‘HTML Config’ to open the ‘Advanced Printer Settings’ window.
Click on the ‘Networking’ tab and choose ‘Wireless’ in the left pane.
Click on the ‘802.11b/g/n Wireless’ and choose ‘Enabled’ from the pop-up appearing on your screen.
Double click on the name of your network to add it to the ‘Current Network Name’ field. After this, type ‘Network pass-phrase’. Hit the ‘Apply’ button.
Add the name of your network to the ‘Current Network Name (SSID)’. Type ‘Network Passphrase’.
Now, you need to disconnect the USB cable from your printing device and the Mac device.
In the ‘Printer and Scanner’, Print and Scan’, or ‘Print and Fax window’. Click on your Printer name and hit the ‘Minus’ sign, and delete the ‘USB Installed’ printer.
Click on the ‘Plus’ sign and click on the ‘Add Printer or Scanner’ option.
Click on the Printer name and click on the ‘Use or Printer Using’ box.
After that, choose the printer name from the pop-up appearing on your screen.
Click on the ‘Add’ option to add the printer.

Important: If you don’t know the network name and password, you need to find the WEP, WPA, WPA2 password.

Article Categories:

Leave a Comment